The Best Manufacturers Make Parts Here
Find the best manufacturer for every part, every time.
Micro Wire Transmission Systems, Inc.
Essex, Vermont
<10
CAGE: 7FWE1 NAICS CODE: 334419 - OTHER ELECTRONIC COMPONENT MANUFACTURING (Cable Assembly) Micro Wire Transmission Systems (MWTS) is a small business offering high quality precision cable assembly and harnessing in Essex Vermont. Our two specialty areas are (1) precision RF harnesses using any mil spec, SMA, BNC and other connectors; and (2) fine wire, fine pitch harnessing solutions down to 47AWG coax. Our technologies are known for high speed data transmission with low EMI and excellent signal to noise ratio. These products are used in Consumer Electronics, Medical Devices, AeroSpace, and Automotive Industries. We have a particularly strong history in medical ultrasound products. We provide a total solution, including design, supply chain management, production engineering, project management, and mass production with a quality focus.
Day Tool & Mfg., Inc
Whitehouse, New Jersey
20-50
For over 50 years, Day Tool Mfg. has been designing and manufacturing precision tooling, stamping dies, special machines and precision machined parts for customers in the biotech, medical, pharmaceutical, packaging, electronic and semi-conductor industries; and most recently the aerospace industry. We are dedicated to providing creative, innovative solutions to manufacturing problems.
Innovative 3D Manufacturing, LLC.
Franklin, Indiana
Manufacturer
<10
Welcome to Innovative 3D Manufacturing. We are located in Franklin, Indiana. We provide Metal & Plastic Additive Manufacturing (AM), more widely known as 3D printing, Wire EDM & Multi Axis CNC Machining. We are AS9100D & ITAR Registered. We service all Manufacturing Markets including Aerospace, Defense, Medical, Heavy Duty Diesel & Automotive. Our focus is Low Volume Production and Prototypes. We currently have Metal AM Qualified parts in production. We work well with design teams to modify geometries and Geometrical Dimensioning & Tolerancing to make parts AM Friendly. AM is a very efficient process to make prototypes or small complex geometries out of tough machining alloys like 718 Inconel or Ti64. We completely finishing parts including Heat Treatment, HIP, Machining, Finishes and Inspection.
Platform Aerospace
Hollywood, Maryland
10-20
AS9100D/ISO 9001:2008 Certified ITAR SDVOSB - Service Disabled Vet Owned Small Business Flight Clearances - NAVAIR, ARMY, AIRFORCE, FAA Platform Aerospace is afull service Design and Fabrication Facility, centrally located in beautiful Maryland -less than 1 mile from Gate 2 of Patuxent River Naval Air Station affording quick attention to YOU. Services: Mechanical Design - Optical, Electro, Avionics, Environmental Control, Vibration Isolation, Motion Control Systems, Thermodynamic Systems, Pressurized Systems Sensor Integration Design - Radars, EO/IR Turrets, COMMINT Packages, SIGINT Packages Analysis Fabrication - Bending, Forming, Cutting, Slitting, Punching, Welding Structural Fabrication Precision CNC Machining - Milling, Turning, 5 Axis Installation with Remote Site Installation Teams Parts Manufacturing Maintenance Iridite - finishing Quick Turn Arounds With our dedication to excellence and over 23 years of experience and training, we dramatically help reduce risk leading to your mission success. Our"Mobile Installation Rapid Response Team" (MIRRT). Our teams launch from Patuxent River Maryland within 24-72 hours and cover installations Nationally or Internationally. Past installations ranged all over the nation from Jacksonville, FL to Elizabeth City,NC to Oklahoma City, OK and even Honolulu Hawaii. For more information about Platform Aerospace, please visit our website atwww.platformaerospace.com- call or email us with all of your project requests. We will appreciate hearing from you!
Knust-Godwin LLC
Katy, Texas
100-200
ISO 9001:2008 API Q1 API certificates for 7-1 5CT Knust-Godwin is the new way forward, the merging of two Houston industry leaders in precision manufacturing. Knust started as a precision watchmaker over fifty years ago and Godwin also started 50 years ago as a precision shop dedicated to the most advanced technology. Together we have over 100 years of combined experience in the oil and gas, geophysical/seismic, semiconductor and medical industries. We are more than just a machine shop; we are part of your manufacturing solution. From concept, to engineering, to prototype, to production runs, we provide you with a place to go for all your machining needs. Our commitment to excellence produces high-precision part components as well as complicated turn-key assemblies. We know the services we provide will bring your projects to completion with confidence. SERVICES: Engineering Additive Manufacturing Long Bore Honing Precision Gundrilling Precision Turning API/Premium Threading Vertical/Horizontal Milling Complex 5 Axis Milling EDM Cold Working Automated ID/OD Welding Long Part E-Beam Welding Multi-Axis Laser Overlay Laser Micro Welding Large Part CMM ID Hammer Peening Assembly Pressure Testing Repair/ Refurbish 3 D Printing Please review our website for a comprehensive view of our company. We are appreciative to be considered a vendor!
Prestige Group
Clinton Township, Michigan
200-500
Prestige Group has been supporting the transportation industry since 1998.The family of companies include: Prestige Extreme (CNC Machining and Manufacturing) Prestige Engineering (Engineering, Design, Staffing) Prestige Warehouse and Assembly (Sequencing, Assembly, Sorting) Prestige Advanced (Advance Interior/Exterior Concept Full Vehicle Development) Prestige Extreme Distribution (Machining, Cutting tools and Industrial equipment)Our capabilities have developed to include: full interior/exterior concept vehicles from clay or digital data, Product development through production design and release, as well as subsystem production assembly / warehousing.The Prestige team provides a technical proficiency not found with many of our competitors. Prestige Engineering has the ability to work on our site or yours and the expertise / facilities to support small or large programs.
Bentley Manufacturing
Marietta, Georgia
50-100
Bentley Manufacturing is an ISO certified, leading contract manufacturer located in Marietta,Georgia. As a competitive manufacturer of machined products since 1975, we have built client relationships from a variety of industries around the world such as aerospace, automotive, medical, oil and gas, and construction. We have extensive machining capabilities, a large range of modern equipment, and broad experience in the manufacturing industry. Our capabilities include milling, turning,waterjet cutting, deep hole drilling, micro drilling, 5 axis, and EDM. Bentley Manfacturing utilizes nearly 50,000 sq.ft. of production space, including a state-of-the-art facility built in 2001, and employs close to 100 people. Confidentiality: All files and associated information shared with Bentley Manufacturing is considered strictly and highly confidential. We look forward to making you our next number one customer!
3D PrintingBlow MoldingCompression MoldingDie CastingElectro-Mechanical AssemblyEngineering & Design ServicesExtrusionsFabricationForgingGearsInjection MoldingInvestment CastingMachiningPrinted Circuit BoardsRotational MoldingRTV MoldingSand Mold CastingSheet MetalSprings & Wire FormingStampingStructural Foam MoldingTube ModificationWire HarnessWoodworking
McGaskets & PTFE Specialties, Inc.
HUMBLE, Texas
Job Shop / Contract Manufacturer
<10
"McGaskets & PTFE Specialties Inc. is an ISO 9001:2015 Certified Business and it has provided quality gasket solutions for over two decades in every shape and style imaginable. We manufacture quality gaskets for all industrial needs. We are professionals at making gaskets and shims for the Oil and Gas field, chemical plants, and ECO energy solutions, ISO Tank Containers, shipbuilders and aerospace industries. Our customers use our products with confidence knowing that they are buying quality confirmed products. McGaskets and PTFE Specialties Inc. is a family owned and operated business. We are proud to offer top quality products at fair prices that will compete in this age industrial markets. Our products quality and quick turnaround meeting customers needs.
AccuKing Inc
New Bern, North Carolina
10-20
Embedded360
Hamilton, New Jersey
500-1000
Embedded360 Inc (E360) is a leading contract manufacturer providing end-end manufacturing and engineering solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs), Tier-1, and aftermarket suppliers primarily in automotive and industrial systems.At E360 we strive to exceed client expectations in quality, delivery, service and time to market and build long-term relationships based on exception Client Satisfaction Index (CSI). Our Clients Engage E360 for realizing maximum value to integrate their end to end engineering and manufacturing workflows: Electronics PCBA Assemblies Molding Casting Machining Wiring Harness Final Box build and Assemblies Value added Service Include: Hardware and PCBA Designs, Firmware Design and Development, Value/Sustenance Engineering, Mechanical and Industrial Design and Rapid Prototyping. Why Embedded360? Integrated manufacturing environment backed up with in-house design and engineering capabilities Best of the product value (by value engineering), without sacrificing the quality Lower total cost of ownership (TCO) than competitors Guaranteed cost savings of 35% Assured product reliability with matured supply chain integrated with OEMs and proven suppliers Reliable product support mechanism, which provides traceability up to the component level
Brogan & Patrick Mfg Corp.
Elkhorn, Wisconsin
20-50
Brogan Patrick specializes in custom plastic and metal machining. The organization caters to the needs of various industrial companies. Brogan Patrick has the capabilities to provide the following custom product solutions and many more: Pins, Nuts, Rings, Sleeves, Washers, Bearings, Standoffs, Bushings, Hex Nuts, Ferrules, Fittings, Spacers, Brackets, Housings, Manifolds, Flanged Bushings, and Shoulder Washers. Brogan Patrick is proficient in working with a variety of metals and plastics. These include PTFE, Polyethylene, Nylon, Delrin, Ultem PEEK, Torlon, PPS, ABS, Stainless Steel, Aluminum, Brass and many others. Founded as Brogan Mfg. in 1985, the organization began by producing plastic engineered products. In 2014, Brogan Mfg. entered into a partnership with Patrick Plastics (founded in 2001) a provider of machined plastic components, leading to the formation of Brogan and Patrick Mfg. Corp. Today, the organization is headquartered in Elkhorn, WI.
Casper's Electronics
Loveland, Colorado
50-100
BEI Electronics, LLC
Franksville, Wisconsin
50-100
Estes Design & Manufacturing, Inc.
Indianapolis, Indiana
50-100
Estes Design and Manufacturing is a full-service sheet metal fabricator. From traditional metal fabrication services to 3D laser welding and rapid prototyping, Estes is your one-stop-shop for all sheet metal projects from conception to full production. We offer customers a combination of design, engineering, and manufacturing services using advanced technology. Our state-of-the-art fabricating equipment allows us to provide customers with high-precision, high-quality parts with short processing times. Our staff of engineers, CAD designers, and manufacturing professionals collaborate to create an environment for rapid response manufacturing across a broad range of product and industry applications including medical equipment, appliance, HVAC, office furniture, food processing equipment, and more.
Thomas Engineering Company
Brooklyn Park, Minnesota
20-50
Thomas Engineering Company was founded in 1962. Our 90,000 sq. ft. manufacturing building is located in Minnesota. We specialize in high-quality, close-tolerance micro-miniature top medium sized metal stampings and assemblies to a wide range of industries and markets. We offer radid prototyping, tool design and construction, ranging from simple stamping dies to complex prgressive stamping and forming dies.
bmi CAD Services, Inc.
Simsbury, Connecticut
10-20
bmiCAD is a Full-Service Electro-mechanical Job Shop specializing in the design, prototyping, and manufacturing of products. We take your project from conception to completion with fully integrated design, analysis, documentation, and production capabilities. Whether a single component or a complex assembly, we ensure that your product meets your requirements.
JMC Tool & Machine
Sanford, North Carolina
Job Shop / Contract Manufacturer
20-50
Sunset Tool Inc
Bridgman, Michigan
Job Shop / Contract Manufacturer
10-20
Sunset Tool is a well-established company specializing in custom machine work, serving our customers with an unmatched attention to detail and quality workmanship. Since 1993, Sunset Tool has been providing world class tooling and engineering services to die casters, manufacturers, iron and aluminum foundries and the plastics industry. We pride ourselves on our excellent customer service that includes prompt communication, timely quotes and on-time delivery.
ARCO Silicone
Hot Springs, Arkansas
100-200
ARCO® Silicone is an ISO 9001:2015 Certified facility that has been in the business of making custom extrusions since 1923. We specialize in producing large and small batches of silicone extrusions using application-specific compounds. In fact, we offer order minimums well below that of other custom silicone extrusion manufacturers and welcome the opportunity to develop prototypes. We work closely with our clients to create unique formulations with the durometer, color, and performance characteristics relevant to the end use of the product.We can supply cross-sectional profiles, tubing, and other various shapes produced in continuous lengths, cut to whatever size is most convenient. We can, also, imprint product information, logos, or graphics on one or both sides. We can design our product to meet any business or military specifications, even FDA 26CFR.Along with a significant presence in the food industry, we serve many customers in the packaging, material handling, and general industrial markets.
Plastics One
Roanoke, Virginia
200-500
Plastics One is a full-service contract manufacturer located in Roanoke, VA. Since 1949, we've been partnering with OEMs worldwide for specific design and product needs - a track record that promises you the power of our connecting abilities in superior manufacturing and customer service. We are proud to design and custom manufacture medical cables and cable assemblies, connectors,and provide injection, insert, and clean room molding with in-house tooling and design services. Plastics One is a progressive manufacturer utilizing the latest techniques to bring you the highest value. As a Lean Six Sigma, ISO 13485:2003 and 9001:2008 certified full-service manufacturer the focus is on designing and building custom cable and connector assemblies with unique design requirements. The engineers and RD teams are hands on, and ready to help bring your ideas to life. If you already have a design, the engineers are available to discuss specific design and usage requirements, as well as offer design assistance, material selection, and prototype services. The RD team works directly with customers to develop prototype parts and tooling to prove out concepts before committing to production tooling.
Cortec Precision
San Jose, California
500-1000
Cortec Precision, founded in 1975 is a leader in metal fabrication (sheet metal / Machining) and turn-key electro mechanical assembly of a diverse range of electronic components, main frames and skins and a provider of electronic manufacturing services (EMS) for the medical, semiconductor, telecommunications, computer government, government security, defense and aerospace markets.Cortec's components and assemblies are manufactured utilizing our experienced technical staff, engineers and some of the most advanced equipment available today.With our own internal fabrication resources and developed supply chain partnerships Cortec has successfully fulfilled the high demand requirements of original equipments manufacturer, and government contractors.Cortec Precision Manufacturing has the manufacturing tools, experience and dedicated work force in place to get your mechanical assemblies delivered on time and within budget, assuring you meet your speed to market.
Elite Tool
Moscow Mills, Missouri
50-100
Elite Toolhas been providing quality products and services to our customers for over 18 years. With a newfound youth and energy Elite Tool has experienced continued growth. While still maintaining the core principles that the company was founded on, Elite Tool has its eyes set on building customer relationships that will last far into the future. We are now located in our new 38,000 sq ft. Moscow Mills, MO Facility. Inside this facility we offer our customers a wide variety of services including: CNC Manual Machining, Abrasive Waterjet Cutting, Mazak Optiplex 3015 Laser and a full service fabrication shop including a climate controlled Paint Booth. Elite Tool is a "Job Shop" that treats our Customers and Employees alike……… just like family!
Prospect Tool Company
Franklin Park, Illinois
20-50
Borg Design, Inc.
Hudson, Massachusetts
20-50
Serving Clients With Precision When it comes to deliveringhigh-quality CNC machining services, Borg Design has set the standard. As a third-generation, family-owned machine shop and contract manufacturer, we've built our reputation by delivering exceptional service that consistently exceeds our clients expectations. This is why leading manufacturers in the aerospace, medical, and high tech industries have chosen us for a wide range ofcustom machiningneeds. And, why we're so eager to serve your needs as well.
Trulife Engineered Solutions
Bellingham, Washington
100-200
Find Manufacturers With the Capabilities You Need
MFG is Where Manufacturing Gets Done
100,000+ Manufacturers
Reviewed and Verified
26 Distinct Marketplaces
Aligned To Your Needs
~1,000,000 RFQs
Manufacturing RFQ Marketplace